Render Tex (bag colour BLUE)

Render Tex is off white cement based 2 pack polymer modified render compound used as a textured Top or Finishing coat, over selected Render One Skim coats.

Overview	Grades	Sample
Suitability	Special Features	Surface Preparation
Mixing Directions	Application Guide	Guarantee
How 2	Waterproofing

GRADES:

1.5mm, 2.0 mm, 3.0 mm

Size of aggregate in product to achieve a specific texture .

Render Tex 1.5mm Vertex Sample - Click below image to view a larger sample

Render Tex 2mm Vertex Sample - Click below image to view a larger sample

Render Tex 3mm Vertex Sample - Click below image to view a larger sample

Render Tex 1.5mm Coral Sample - Click below image to view a larger sample

Render Tex 2mm Coral Sample- Click below image to view a larger sample

Render Tex 3mm Coral Sample - Click below image to view a larger sample

Suitability

• Masonry Block
• Clay Bricks
• Hebel Panels/Blocks
• Cement Sheet
• Cement Panels
• Polystyrene Sheets
• Tiles
• PVC
• Painted Surfaces

Back to Top

Special Features

• Water soluble, easy to clean and environmentally friendly
• Easy to apply and fast to finish
• Superior adhesion eliminating drummyness and delamination
• Can be applied to damp substrates
• Excellent impact and mechanical strengths
• Rain resistant short time after application
• Can be coated with a paint or membrane 48 hours after completion

Back to Top

Surface Preparation:

All surfaces to be free of oil, dust and loose mortar prior to application

Back to Top

Mixing Directions:

1. All Render One Top or finishing coats will be mixed with a 4:1 water/polymer ratio
2. Pour approximately four and a half (4.5) litres of the diluted Render One polymer into a clean empty 15 litre pail
3. Gradually add the selected render one Render Tex and mix with a variable speed/high torque mixing drill fitted with a suitable spiral mixer

   Note: Over mixing of high speed mixing may cause aerating which can affect usability.

Back to Top

Application Guide

Mix thoroughly to a workable consistency and apply over Render One Skim Coats using hawk and trowel or approved render spray pumps

Top Coat Description: Coral

1. Apply product to a thickness equaling the grade of Render Tex used
   Trowel off excess product in a horizontal motion using a steel trowel
2. Using a Render One plastic trowel, float product utilizing a fast firm circular arm motion to achieve a seamless flat, coral swirl pattern.

Top Coat Description: Vertical

1. Apply product to an approximate thickness equaling the grade of Render Tex being used
2. Using a steel trowel, remove excess product in a downward vertical motion
3. Using a Render One Polystyrene float, strike the product on the wall in a downward motion to provide a uniform vertical scratch
4. Utilizing the same downward motion lightly float over textured surface to achieve a flat, even vertical scratch using a Render One plastic trowel

Painting Guide:

Allow at least 48 hours to dry before painting, paint with two (2) coats of a high quality acrylic membrane or paint

Back to Top

Guarantee:

Ten year guarantee when applied by an approved applicator to Render One Specifications.

Back to Top

How 2

Render Tex as a finish coat

1st Coat	Apply Render One: Regular gauge skim Floatable Classic for uneven substrate
2nd Coat	Apply Render One Render Tex
3rd Coat	Apply One Coat of High Grade acrylic paint or membrane
4th Coat	Apply One Coat of High Grade acrylic paint or membrane

Back to Top

WATERPROOFING PROPERTIES

Render One is waterproof in areas subject to non-immersion once system is completed to specification.